Menu
Cart 0
2GIG CAM-HD100

2GIG CAM-HD100

paconnect

  • 18795
  • Save $ 37


720P HD Indoor Camera with Night Vision

The 2GIG CAM-HD100 is a 720P HD indoor camera with night capabilities. There is a built-in PIR motion detector and IR illuminator for night

Description

The 2GIG CAM-HD100 is a 720P HD indoor camera with night capabilities. There is a built-in PIR motion detector and IR illuminator for night vision. Both of these technologies has a maximum range of 5 meters. The camera is ethernet (10/100Mbps) and WIFI ready. Traditionally, IP cameras that support WIFI require a WPS (WIFI Protected Setup) button on the WIFI router for internet configuration. Although the camera supports WPS WIFI enrollment, it does not require it. The camera can be temporarily hardwired via ethernet to the WIFI router. Using a PC, you can configure the camera for WIFI configuration. After it is setup for WIFI via the alarm.com website, you can remove the ethernet cable.

The CAM-HD100 will stream video via the WIFI network, it still requires a wired power connection. There is an included 12VDC 1A power supply with a male DC plug which connects to the camera's power port. If you need to extend the power cable it is recommended that you use 18 gauge stranded cabling with cleanly crimped connections. The LED on the front of the camera should be solid green when in normal operation. The LED will blink red when there are connectivity issues with the network. During the WPS pairing process, the LED should be blinking yellow. Lastly, during the initial boot up sequence the LED is solid yellow.


We Also Recommend