Menu
Cart 0
Honeywell IPCAM-PTPS

Honeywell IPCAM-PTPS

Honeywell

  • 795
  • Save $ 3.05


IPCAM-PT Power Supply 5VDC, 2A

The Honeywell IPCAM-PTPS is a power supply used to provide power to a Honeywell IPCAM-PT pan/tilt IP security camera.

Description

The Honeywell IPCAM-PTPS is a power supply used to provide power to a Honeywell IPCAM-PT pan/tilt IP security camera. As the IPCAM-PT has the more advanced pan/tilt feature it requires more input power than the IPCAM-WI2 fixed IP security camera. The power supply for the IPCAM-WI2 is rated at 5VDC, 1A, while the IPCAM-PTPS power supply for the IPCAM-PT is rated at 5VDC, 2A.

One end of the IPCAM-PTPS power supply has a male DC connector and the other end has a power transformer that steps down the 110VAC power from your wall outlet to a usable power output for the Honeywell pan/tilt IP security camera. To install the power supply, simply plug the DC connector into the ‘POWER’ port on the back left side of the IPCAM-PT security camera. There is a green ‘POWER’ LED on the front of the pan/tilt camera that lights up solid when the security camera is initialized and adequate power is being supplied. When you first power on the IPCAM-PT by plugging the IPCAM-PTPS power supply into your wall outlet, the green ‘POWER’ LED will blink during the (20) seconds camera initialization sequence.

Always plug your Honeywell security camera’s power supply into a non-switchable power outlet. If you use a switchable wall outlet, you run the risk of someone accidentally turning off your IPCAM-PT security camera by flipping the switch that operates the outlet. Also, make sure to always plug your Ethernet cable into the security camera before powering it on if you will be using the wired mode. If you want to use the WiFi feature of the IPCAM-PT, you should make sure there is no Ethernet cable connected before plugging the IPCAM-PTPS power supply into your wall outlet.


We Also Recommend